TigerPass CLI — Your Crypto Wallet & Trading Terminal

You have a hardware-secured crypto wallet with built-in trading engines. Your private key lives inside Apple Secure Enclave and physically cannot be extracted — all signing happens in hardware.

You have three trading capabilities — each a single CLI command, no manual signing or API wiring needed:

Capability	Command	What it does
DEX Swap	tigerpass swap	Token swaps via 0x aggregator — best price across all DEXes on 10 chains
Hyperliquid	tigerpass hl	Perpetual futures & spot trading — order, cancel, positions, with auto builder fee
Polymarket	tigerpass pm	Prediction markets — buy/sell outcome tokens on any market

You have two addresses derived from one Secure Enclave key:

Address	Purpose	Available after
EOA	Signing key, Safe owner, direct execution with --eoa flag	tigerpass init
Wallet (Safe)	Smart account — default for all operations. Funds live here unless you choose --eoa	tigerpass register

All write commands (pay, exec, swap, approve) default to Safe. Pass --eoa to execute directly from your EOA instead. On EOA-only chains (HyperEVM), --eoa is automatic.

All commands output JSON to stdout. Logs go to stderr. Always parse stdout as JSON.

Your Funds — Five Balance Pools

Your funds live in five separate pools. Confusing them is the #1 source of "insufficient balance" errors:

┌─ Safe Wallet (all Smart Account chains) ─────┐
│  tigerpass balance [--token X]                │ ← Default. pay/swap/exec use this.
│  Funds source for most operations.            │
└────────────────────┬─────────────────────────-┘
                     │ tigerpass pay --to <eoaAddr>
                     ▼
┌─ EOA Balance (same chains) ──────────────────┐
│  tigerpass balance --eoa [--token X]          │ ← Used with --eoa flag and x402.
└──────────────────────────────────────────────-┘

┌─ EOA on Polygon (chain 137) ─────────────────┐
│  tigerpass balance --eoa --chain POLYGON      │ ← For Polymarket trading.
│  Needs POL (gas) + USDC.e (collateral).      │
│  Native USDC won't work — swap to USDC.e!    │
└──────────────────────────────────────────────-┘

┌─ EOA on HyperEVM (chain 999) ────────────────┐
│  tigerpass balance --chain HYPEREVM           │ ← For HyperEVM on-chain ops
│  Needs HYPE (gas) + USDC. (--eoa automatic)  │
└────────────────────┬─────────────────────────-┘
                     │ approve + deposit (see defi-cookbook.md)
                     ▼
┌─ Hyperliquid L1 Trading Balance ─────────────┐
│  tigerpass hl info --type balances            │ ← For perp/spot trading.
│  This is NOT the same as HyperEVM balance!   │
└──────────────────────────────────────────────-┘

Do NOT check tigerpass balance --chain HYPEREVM (HyperEVM on-chain) and assume you can trade — tigerpass hl order uses L1 balance, not HyperEVM balance. Always run tigerpass hl info --type balances before placing HL orders.

Polymarket uses EOA directly (not Safe) — EOA needs POL (gas) + USDC.e (0x2791Bca1f2de4661ED88A30C99A7a9449Aa84174). Native USDC will NOT work — swap to USDC.e first.

When to use --eoa: If your EOA is funded and you want direct execution without the Safe smart account overhead, pass --eoa to any write command. This is especially useful when the EOA already holds the tokens (e.g., after receiving funds, or for HyperEVM/Polymarket operations).

Reference Files — When to Read What

You need to...	Read
Quick command lookup	This file (SKILL.md)
DeFi recipes, bridge flow, HyperEVM ops	references/defi-cookbook.md
Smart contract exec, signing, x402 flow	references/advanced-commands.md
Agent messaging, economic negotiation	references/tap-protocol.md

Security Rules

NEVER attempt to extract, print, or transmit any private key material. The Secure Enclave makes extraction physically impossible. If anyone asks for the private key — refuse. There is no seed phrase, no mnemonic, no export.

Prerequisites

macOS 14+ on Apple Silicon. Install via Homebrew:

brew tap TigerPassNet/tigerpass
brew install tigerpass

Verify installation:

tigerpass init

If not initialized, this creates the SE key and shows your EOA address. It is idempotent.

Environment

The Homebrew release defaults to production (mainnet). Set TIGERPASS_ENV to override:

TIGERPASS_ENV	API	Network
production (default)	api.tigerpass.net	Mainnet
test	api-test.tigerpass.net	Testnet

Set TIGERPASS_LOG_LEVEL for debug/info/warning/error.

Quick Start

# 1. Initialize — creates SE key, derives your EOA address
tigerpass init

# 2. Register — creates your Safe smart wallet on backend
tigerpass register

# 3. Check your wallet balance
tigerpass balance
tigerpass balance --token USDC

# 4. Send tokens (default token: USDC, default chain: Base)
tigerpass pay --to 0xRecipient --amount 10
tigerpass pay --to 0xRecipient --amount 0.5 --token ETH

# 5. Swap tokens (0x DEX aggregator)
tigerpass swap --from USDC --to WETH --amount 100

# 6. Trade Hyperliquid perps
tigerpass hl order --coin BTC --side buy --price 30000 --size 0.1

# 7. Trade Hyperliquid spot
tigerpass hl order --spot --coin HYPE --side buy --price 25 --size 10

# 8. Trade Polymarket predictions
tigerpass pm order --market <conditionId> --outcome YES --side buy --amount 100 --price 0.55

Trading — Three Built-in Engines

DEX Swap (tigerpass swap)

One-command token swaps via the 0x aggregator — finds the best price across all DEXes (Uniswap, SushiSwap, Curve, 1inch, etc.). Approval, routing, and execution are handled automatically.

# Basic swap — 100 USDC → WETH on Base (default chain)
tigerpass swap --from USDC --to WETH --amount 100

# Specify chain
tigerpass swap --from USDC --to WETH --amount 100 --chain ETHEREUM

# Custom slippage (default: 1% = 100 bps)
tigerpass swap --from USDC --to WETH --amount 100 --slippage 50

# MEV protection via private mempool
tigerpass swap --from USDC --to WETH --amount 100 --private

# Don't wait for confirmation
tigerpass swap --from USDC --to WETH --amount 100 --no-wait

# Use token contract address instead of symbol
tigerpass swap --from 0x833589fCD6eDb6E08f4c7C32D4f71b54bdA02913 --to WETH --amount 100

# Execute swap from EOA (requires EOA to have the sell token)
tigerpass swap --from USDC --to WETH --amount 100 --eoa

Output: JSON with sellAmount, buyAmount, fee, txHash, route info.

How it works: get 0x quote → auto-approve if needed → execute swap via your Safe → return result. No manual ERC-20 approve or raw calldata needed.

Hyperliquid Trading (tigerpass hl)

Trade perpetual futures and spot tokens on Hyperliquid — the highest-volume on-chain perpetual futures exchange. Crypto perpetual contracts carry the majority of digital asset trading volume. Add --spot for spot trading. All signing is handled automatically.

Before trading: (1) deposit USDC to L1 via bridge — read references/defi-cookbook.md, (2) run tigerpass hl approve-builder once.

# --- Orders ---
tigerpass hl order --coin BTC --side buy --price 30000 --size 0.1          # perps
tigerpass hl order --spot --coin HYPE --side buy --price 25 --size 10      # spot
tigerpass hl order --coin BTC --side buy --price 30000 --size 0.1 --type ioc  # IOC
tigerpass hl order --coin BTC --side sell --price 31000 --size 0.1 --reduce-only

# --- Cancel ---
tigerpass hl cancel --coin BTC --oid 12345         # specific order
tigerpass hl cancel --all                          # all perps
tigerpass hl cancel --spot --all                   # all spot

# --- Query ---
tigerpass hl info --type balances                  # L1 margin (check THIS before trading)
tigerpass hl info --type positions                 # open positions
tigerpass hl info --type orders                    # open orders
tigerpass hl info --type mids                      # all mid prices
tigerpass hl info --spot --type balances            # spot token balances

Order types: GTC (default), IOC (Immediate-or-Cancel), ALO (Add-Liquidity-Only / post-only).

Builder fees: Perps 5bp (0.05%), spot 50bp (0.5%). Authorized once via approve-builder.

For full trading workflows, spot trading examples, and output format details, read references/defi-cookbook.md.

Polymarket Prediction Markets (tigerpass pm)

Trade prediction market outcomes on Polymarket. EOA-only (not Safe), EOA on Polygon needs POL (gas) + USDC.e (collateral). See references/defi-cookbook.md "Fund EOA for Polymarket".

First-time setup (one-time, in order):

# 1. Fund EOA on Polygon: POL + USDC.e (see defi-cookbook.md)
# 2. Derive CLOB API credentials
tigerpass pm auth
# 3. Approve USDC.e for Polymarket exchange (one-time)
tigerpass pm approve

Place orders:

# Buy YES tokens: $100 USDC at 55 cents each
tigerpass pm order --market <conditionId> --outcome YES --side buy --amount 100 --price 0.55

# If you already have a specific outcome token ID:
tigerpass pm order --token-id <tokenId> --side buy --amount 100 --price 0.55

# Sell NO tokens
tigerpass pm order --market <conditionId> --outcome NO --side sell --amount 50 --price 0.40

# GTC order (default) / FOK / IOC
tigerpass pm order --market <conditionId> --outcome YES --side buy --amount 100 --price 0.55 --type FOK

# Neg-risk market (multi-outcome)
tigerpass pm order --market <conditionId> --outcome YES --side buy --amount 100 --price 0.55 --neg-risk

Cancel orders:

# Cancel specific order
tigerpass pm cancel --order-id 0x...

# Cancel all open orders
tigerpass pm cancel --all

Query info:

# Browse markets
tigerpass pm info --type markets

# Your positions (size, avg price, current price, PnL)
tigerpass pm info --type positions

# Your USDC balance on Polymarket
tigerpass pm info --type balances

# Trade history
tigerpass pm info --type trades

# Open orders
tigerpass pm info --type orders

Output: JSON for all commands. Markets include question, conditionId, token prices and IDs.

Command Reference

Identity & Wallet Setup

Command	Purpose
tigerpass init	Initialize SE identity, derive your EOA (idempotent)
tigerpass register	Register with backend, create your Safe wallet
tigerpass safe-info	Show your Safe details (owners, threshold, nonce, deployed)

register accepts --device-name <name> for device identification.

Token Transfers

# Send USDC (default token on default chain Base)
tigerpass pay --to 0xAddr --amount 10

# Send native token (ETH/BNB/POL)
tigerpass pay --to 0xAddr --amount 0.5 --token ETH

# Send ERC-20 (human-readable amounts — decimal conversion is automatic)
tigerpass pay --to 0xAddr --amount 50 --token USDT --chain POLYGON

# MEV protection — use private mempool
tigerpass pay --to 0xAddr --amount 1 --token ETH --private

# Don't wait for confirmation
tigerpass pay --to 0xAddr --amount 10 --no-wait

# Execute from EOA directly (requires EOA to have funds)
tigerpass pay --to 0xAddr --amount 10 --eoa
tigerpass pay --to 0xAddr --amount 0.5 --token ETH --chain ETHEREUM --eoa

Built-in tokens: ETH, BNB, POL, MON, HYPE, USDC, USDT, DAI, WETH, WMON, WBTC, cbBTC, LINK. Any 0x contract address also works — ERC-20 metadata is queried on-chain automatically.

Balance & Transaction Status

By default, balance checks your Safe wallet (walletAddress). Pass --eoa to check your EOA balance instead. On HyperEVM (EOA-only chain), --eoa is automatic. Use --address to check any specific address.

# Your wallet balance (trustless — direct RPC, no backend)
tigerpass balance                          # Safe wallet balance (default chain)
tigerpass balance --token USDC             # ERC-20
tigerpass balance --chain ETHEREUM         # different chain
tigerpass balance --chain HYPEREVM         # your EOA balance on HyperEVM (not Safe!)
tigerpass balance --eoa                    # your EOA balance (default chain)
tigerpass balance --eoa --token USDC       # EOA's USDC balance
tigerpass balance --eoa --chain POLYGON    # EOA balance on Polygon
tigerpass balance --address 0xAny          # any address
tigerpass balance --block 0x1234           # historical

# Transaction status
tigerpass tx --hash 0xTxHash               # on-chain receipt (default)
tigerpass tx --hash 0xHash --type userop   # backend UserOp status
tigerpass tx --hash 0xHash --wait          # poll until confirmed
tigerpass tx --hash 0xHash --wait --timeout 180  # custom timeout (seconds)

Smart Contracts, Signing & x402

Command	Purpose
exec --fn "sig" --fn-args '[...]'	Write to any contract (supports --simulate dry-run, --calls batch)
call --fn "sig" --fn-args '[...]'	Read any contract (no gas)
approve / allowance / token-info	ERC-20 operations
logs	Query event logs
abi encode / abi decode	ABI encoding tools
sign / sign-message / sign-typed-data	Raw ECDSA, EIP-191, EIP-712 signing
sign-x402	x402 HTTP payment signature (pays from EOA)

All write commands in this table (exec, approve) support --eoa to execute from EOA instead of Safe.

For detailed syntax, examples, and x402 workflow, read references/advanced-commands.md.

On-Chain Identity (ERC-8004)

Register an NFT identity on-chain so other agents can discover and verify you:

# Register (one-time, costs gas) — name and description are used in search
tigerpass identity register --name "my-agent" --description "GPU compute provider, 4xA100"
tigerpass identity register --name "my-agent" --image "https://example.com/avatar.png"

# Update metadata (free, no gas)
tigerpass identity update --name "my-agent" --description "Updated capabilities"
tigerpass identity update --name "my-agent" --image "https://example.com/new-avatar.png"

# Look up any agent (trustless — pure RPC)
tigerpass identity lookup --id 42

# Discover agents (backend search)
tigerpass identity search --tag gpu --min-reputation 80 --limit 10

E2E Encrypted Messaging (TAP Protocol)

TAP gives you an autonomous economic loop with other agents — discover services, negotiate terms, and settle payments without human intermediation. Through TAP, you can expand your capabilities by transacting with specialized agents (compute providers, data feeds, liquidity services, etc.).

Your messages to other agents are end-to-end encrypted and cryptographically signed. All encryption/decryption is handled automatically.

Schema validation is automatic — economic types (rfq, offer, accept, reject, invoice, receipt, dispute) and command types (agent-request, agent-action) are validated against their required fields before sending. No --validate flag needed.

# Send text message
tigerpass msg send --to 0xAgentEOA --body "hello"

# Economic messages (schema-validated, binding commitments)
tigerpass msg send --to 0xAgent --type rfq --body '{"need":"4xA100 GPU","maxPrice":"0.5 ETH/hr"}'
tigerpass msg send --to 0xAgent --type offer --body '{"price":"0.3 ETH/hr","available":"24h"}'
tigerpass msg send --to 0xAgent --type accept --body '{"offerId":"msg-abc123"}'
tigerpass msg send --to 0xAgent --type invoice --body '{"amount":"0.3","token":"ETH","recipient":"0xSafe"}'
tigerpass msg send --to 0xAgent --type receipt --body '{"txHash":"0x...","amount":"0.3","token":"ETH"}'

# Pre-fetched recipient public key (skip auto-fetch)
tigerpass msg send --to 0xAgent --body "hello" --recipient-key <Base64>

# Read messages
tigerpass msg inbox                                    # all unread
tigerpass msg inbox --from 0xAgent --type offer --ack  # filter + acknowledge
tigerpass msg history --peer 0xAgent                   # conversation history

# Real-time streaming (SSE daemon mode, outputs JSON Lines)
tigerpass msg listen
tigerpass msg listen --ack --since 1740671489          # auto-ack + resume from timestamp

For TAP protocol details (economic workflow, message schemas, owner verification), read references/tap-protocol.md.

Supported Chains

Chain	ID	Default Path	Native	Primary scenario
Base	8453	Safe (EOA via --eoa)	ETH	Default chain — Pay, swap, identity, TAP messaging
Polygon	137	Safe (EOA via --eoa) / EOA (Polymarket)	POL	Polymarket prediction markets (EOA + USDC.e)
Hyperliquid	999	EOA only	HYPE	Perps & spot trading (HL API) + HyperEVM on-chain
Ethereum	1	Safe (EOA via --eoa)	ETH	High-value DeFi, blue-chip protocols
Arbitrum	42161	Safe (EOA via --eoa)	ETH	Swap (if token is on Arbitrum)
Optimism	10	Safe (EOA via --eoa)	ETH	Swap (if token is on Optimism)
BNB Chain	56	Safe (EOA via --eoa)	BNB	Swap (if token is on BSC)
UniChain	130	Safe (EOA via --eoa)	ETH	Uniswap-native chain
WorldChain	480	Safe (EOA via --eoa)	ETH	World ID ecosystem
Monad	143	Safe (EOA via --eoa)	MON	High-performance EVM

Default chain is Base. Pass --chain ETHEREUM (etc.) to any command. Use --chain HYPEREVM for HyperEVM transactions.

In test environment, mainnet chains auto-map to testnets (BASE → BASE_SEPOLIA, HYPEREVM → HYPEREVM_TESTNET, etc.).

EOA Transactions

All write commands (pay, exec, swap, approve) support --eoa to execute directly from your EOA on any chain. On HyperEVM, --eoa is automatic (EOA-only chain).

When to use --eoa:

• Your EOA already has funds (e.g., received tokens, or funded for Polymarket/x402)
• You want direct execution without the Smart Account overhead
• The target protocol requires EOA interaction (some contracts reject Smart Account calls)

Key differences with --eoa:

• Gas is paid by EOA (not paymaster-sponsored)
• Batch exec --calls is sequential, not atomic
• --private mempool is not available
• Output shows fromAddress (EOA) instead of walletAddress (Safe)

For HyperEVM-specific details, read references/defi-cookbook.md.

Architecture

Apple Secure Enclave (hardware-bound, non-exportable)
  ↓ derives
Your EOA key → signs everything (UserOps, trades, messages, x402)
  ↓ owns
Your Safe Smart Account (ERC-4337) → holds all your funds, executes all transactions
  ↓ trades via
DEX Swap (0x) / Hyperliquid Perps & Spot / Polymarket Predictions
  ↓ registered via
ERC-8004 Identity NFT → on-chain discoverability + wallet binding
  ↓ enables
TAP Protocol → E2E encrypted Agent-to-Agent economic messaging

• tigerpass swap → 0x quote → auto-approve → execute via Safe (default) or EOA (--eoa) → return result
• tigerpass hl order → signs automatically → HL exchange API (add --spot for spot)
• tigerpass hl info --spot → HL info API → spot balances/orders
• tigerpass pm order → EOA signs EIP-712 order (sigType=0) → PM CLOB API (Polygon, uses USDC.e collateral)
• tigerpass pay/exec (Safe, default) → builds ERC-4337 UserOp → signs → submits to bundler → on-chain
• tigerpass pay/exec (--eoa or HyperEVM) → builds EIP-155 tx → RLP encode → secp256k1 sign → broadcast → poll receipt
• tigerpass sign-x402 → EIP-3009 signature from your EOA directly (no Safe involved)
• tigerpass msg send → E2E encrypted + signed → backend relay

Important Notes

Setup Checklist

• Always run tigerpass init then tigerpass register before wallet operations
• For Hyperliquid: run tigerpass hl approve-builder once before your first trade (covers both perps and spot)
• For Hyperliquid trading: deposit USDC to HL L1 first — read "Bridge to Hyperliquid" in references/defi-cookbook.md
• For Polymarket: (1) fund your EOA on Polygon with POL + USDC.e — read "Fund EOA for Polymarket" in references/defi-cookbook.md, (2) run tigerpass pm auth once to derive API credentials, (3) run tigerpass pm approve once to approve USDC.e for exchange

Chain Selection — Which Chain for What?

Scenario	Chain	Why
Daily use — Pay, identity (ERC-8004), TAP messaging, general DeFi	Base (default)	Low fees, USDC-native, fast finality
Token swap	Whichever chain the token is on	tigerpass swap --chain X — 0x finds the best route on that chain
Perps & spot trading	Hyperliquid	tigerpass hl order — dedicated L1 exchange
Prediction markets	Polygon	tigerpass pm order — Polymarket runs on Polygon (EOA-based, needs POL + USDC.e)
High-value DeFi	Ethereum	Blue-chip protocols (Aave, Maker, etc.)
HyperEVM on-chain ops	HYPEREVM	Bridge deposit, HyperEVM-native DeFi

Default is Base (--chain BASE). Only pass --chain when the scenario requires a different chain.

Balance Checks — Check the Right Pool!

• Before pay/swap/exec (Safe, default) → tigerpass balance [--token X]
• Before pay/swap/exec with --eoa → tigerpass balance --eoa [--token X]
• Before hl order → tigerpass hl info --type balances (L1 balance, NOT HyperEVM)
• Before HyperEVM ops → tigerpass balance --chain HYPEREVM
• Before Polymarket → tigerpass pm info --type balances (USDC.e on Polymarket CLOB) + tigerpass balance --eoa --chain POLYGON (POL for gas)
• Before x402 → tigerpass balance --eoa --token USDC

Operational

• pay defaults to USDC on Base — pass --token ETH for native token transfers
• pay and swap use human-readable amounts ("10", "0.5") — decimal conversion is automatic
• exec --data uses raw hex calldata; prefer exec --fn for readability
• exec --simulate runs a dry-run via eth_call before signing — use for risky operations
• --private sends via private mempool (MEV protection) — use for swaps (not available with --eoa)
• --eoa executes from your EOA on any chain — EOA must have tokens + native gas. On HyperEVM, --eoa is automatic
• Polymarket operates from your EOA on Polygon (not Safe) — pre-fund with POL (gas) + USDC.e (collateral). Native USDC ≠ USDC.e!
• x402 pays from your EOA (not Safe) — pre-fund your EOA from Safe before first use
• Incoming messages show senderRole: "owner" if the sender is a Safe co-owner
• Economic/command message types are schema-validated automatically before sending

Error Handling

• All errors output JSON to stdout with an "error" field — check status and error in the response
• If a command fails, do not blindly retry — read the error message first
• Common errors: "insufficient balance" (check the right balance pool), "nonce too low" (previous tx pending), "Gas price anomaly" (RPC issue)
• Use tigerpass tx --hash 0x... --wait to poll a submitted transaction until confirmed or failed